HEAD GASKET SET SUITABLE FOR

ROVER T-SERIES ENGINES 2.0 1994cc DOHC 16V BELT DRIVEN ENGINES
THE HEAD GASKET IS MADE UP OF 4 STEEL LAMINATES - (AS ARE THE GASKETS IN OUR OTHER AUCTIONS) - BUT THIS GASKET IS MANUFACTURED BY OEM SUPPLIER ELRING KLINGER OF GERMANY - THE EXHAUST MANIFOLD GASKET IS ALSO HEAVY DUTY WITH A STEEL SHIM ONE SIDE AND WITH STEEL REINFORCED BORES
COUPE 2.0 1992-94

COUPE 2.0 TURBO 1992-94

200 SERIES 220 2.0 1992-94
GSi, GTi, SLi

200 SERIES 220 2.0 TURBO 1992-94
GSi, GTi

400 SERIES 420 2.0 1992-94
GSi, SLi, Si, Tourer

400 SERIES 420 2.0 TURBO 1992-94
GSi, GSi Sport Turbo

600 SERIES 620 2.0 TURBO 1994 Only
Ti

800 SERIES 2.0 1992-94
i, SE, Si, SLi

800 SERIES 820 2.0 TURBO 1992-94
Sport, Vitesse
IF YOUR VEHICLE IS 1994/95 AND ARE UNSURE IF YOU REQUIRE THIS GASKET SET OR THE 1995 ONWARDS SET THE DIFFERENCES FOR COMPARISON ARE AS FOLLOWS

PRE 1995 = ONE COMPOSITE PLATE TYPE CAM COVER GASKET AND ONE RUBBER CAM COVER GASKET OR TWO PLATE TYPE GASKETS, 18mm VALVE STEM OIL SEALS
1995 on = TWO RUBBER CAM COVER GASKETS, 14mm VALVE STEM IL SEALS

ALSO CONTAINS VALVE/CAM COVER X 3 (ONE ALTERNATIVE GASKET NOT SHOWN IN THE PHOTO),INLET MAN GASKETS X 2,EX MAN GASKET (ELRING),VALVE SEALS (18mm) X 16,INJECTOR O RINGS X 8,CAM OIL SEALS X 4,SEVERAL SMALL GASKETS

HEAD BOLTS ARE THE STRETCH DESIGN AND MUST BE REPLACED,IF REQUIRED PLEASE SEE AUCTION 310117855868

UK - BUYERS COMBINED SHIPPING WILL BE £8.50 (NOT AVAILABLE AT THIS PRICE EXPRESS)
EBAY WILL NOT MAKE THIS REDUCTION SO PLEASE DO NOT PAY UNTIL YOU HAVE OUR REVISED INVOICE
PLEASE SEE OUT OTHER AUCTIONS FOR VALVES & BOTTOM END GASKET SET